13. REAR WHEEL/SWING ARM/ HYDRAULIC BRAKE Mongoose/KXR 90/50 REAR WHEEL REAR WHEEL REMOVAL Place the machine on a level place. Remove four nuts attaching the wheel. Elevate the rear wheels by placing a suitable stand under the rear of frame. Support the machine securely so there is no danger of it falling over. Remove wheel. Nuts INSPECTION Measure the wheel runout. Service Limit: Vertical: 2.0 mm Lateral: 2.0mm Replace wheel if out of specification. INSTALLATION Install the rear wheel and tighten the nuts (wheel). Torque: 4.05.0kgf-m 13-4