3. INSPECTION/ADJUSTMENT Mongoose/KXR 90/50 Drive Belt DRIVE BELT Remove the left crankcase cover. Inspect the drive belt for cracks, scaling, chipping or excessive wear. Measure the V-belt width Service limit: Mongoose/KXR 90:16.5mm Mongoose/KXR 50:16.5mm Replace the drive belt if out of specification. BRAK SHOES The checking of brake shoes wear will disassemble the brake. If the lining thickness below to the wear limit (A) 2.0mm (0.08in), to replace the shoes as a set. BRAKE PADS A wear indicator is provided on each brake. The indicators allows checking of brake pads wear. Check the position of the indicator. If the indicator reaches the wear limit line, to replace the pads. Inspection Window BRAKE FLUID Check if the fluid level is below the lower level mark through the inspection window. 3-12