3. INSPECTION/ADJUSTMENT Mongoose/KXR 90/50
Make sure the cut-out on the adjusting
nut Is seated on the brake arm pin after
making final free play adjustment.
Arm Pin Adjusting Nut
STEERING SYSTEM
INSPECTION
Place the machine on a level place.
Check the steering column bushings and
bearings:
Move the handlebar up and down, and/or
back and forth.
Replace the steering column bushings and
or bearings if excessive play
Tie-rod Ends
Check the tie-rod ends
Turn the handlebar to the left and/or right
until it stops completely, then slightly move
the handlebar from left to right.
Replace the tie-rod ends if tie-rod end has
any vertical play.
Raise the front end of the machine so that
there is no weight on the front wheels.
Check ball joints and/or wheel bearings.
Move the wheels lately back and froth.
Replace the front arms and/or wheel
bearings if excessive free play.
3-14
Fast delivery and good communication ! The parts fit perfectly ! Thank you very much ! 
4.7 / 5