4. LUBRICATION SYSTEM Mongoose/KXR 90/50 OIL TANK (Mongoose/KXR 50) OIL TANK REMOVAL Remove the oil level switch connector. Remove the two bolts attaching the oil tank. Bolts Oil Level Switch Connector Oil Inlet Tube Disconnect the oil inlet tube. Drain the oil inside the oil tank into a clean container. Remove the oil tank. The installation sequence is the reverse of removal. · Connect the oil tube properly. · Bleed air from the oil pump after installation. (See page 4-9) · The oil tube clip (at the oil tank side) must be locked from inside of the oil tube joint. 4-10