super 9 3 Workshop-manual : Page 147

          12. CARBURETOR                                                               SUPER 9    50


 REED VALVE                                                          Bolts

 REMOVAL
 Remove the rear carrier.
 Remove the frame body cover.
 Remove the four intake manifold bolts and
 gasket.
 Remove the reed valve and gasket.




                                                  Intake Manifold


 INSPECTION                                                Reeds         Reed Stopper
 Check the reed valve for damaged or weak
 reeds.
 Check the reed valve seat for cracks,
 damage or clearance between the seat and
 reed.
 Replace the valve if necessary.
 Do not disassemble or bend the reed
   stopper. To do so can cause loss of
   engine power and engine damage. If
   any of the stopper, reed or valve seat is
   faulty, replace them as a unit.



                                                   Reed Valve Seat

 INSTALLATION
 Install the reed valve in the reverse order of
 removal.

   · Install a new gasket with the gasket
     indentation aligned with the reed
     valve.
   · After installation, check for intake air
     leaks.




12-11