super 9 3 Workshop-manual : Page 54

          3. INSPECTION/ADJUSTMENT                                                    SUPER 9             50


 FINAL REDUCTION GEAR OIL                                      Oil Check Bolt Hole/Oil Filler

 · Place the motorcycle on its main stand
      on level ground.
 Stop the engine and remove the oil check
 bolt.
 The oil level shall be at the oil check bolt
 hole.
 If the oil level is low, add the recommended
 oil SAE90# to the proper level.

 Install the oil check bolt.
 · Make sure that the sealing washer is in
      good condition.



 OIL CHANGE
 Remove the oil check bolt.
 Remove the oil drain bolt and drain the oil
 thoroughly.
 Install the oil drain bolt.
 Torque: 9.8N-m
 · Make sure that the sealing washer is in
      good condition.

 Fill the final reduction with the recommended
 oil SAE90#.
 Gear Oil Capacity:
    At disassembly : 120cc
    At change        : 100cc
                                                  Oil Drain Bolt/Sealing Washer
 Reinstall the oil check bolt and check for oil
 leaks.

 DRIVE BELT
 Remove the left crankcase cover.
 Inspect the drive belt for cracks or excessive
 wear.
 Replace the drive belt with a new one if
 necessary and in accordance with the
 Maintenance Schedule.




                                                  Drive Belt

3-9