super 9 3 Workshop-manual : Page 68

          5. ENGINE REMOVAL/INSTALLATION                                           SUPER 9           50


                                                                                     Clamp
 ENGINE REMOVAL
 Remove the frame body cover. ( 2-2)
 Remove the brake fluid tube bolt of the rear
 brake caliper.
 Remove the rear brake caliper bolt and the
 rear brake caliper.




                                                Rear Brake Caliper            Bolt

                                                Auto Fuel Valve           Oil Inlet Line
 Disconnect the oil pump control cable from
 the pump body.
 Disconnect the oil inlet line from the oil
 pump.

   After the oil inlet line is disconnected,
   plug the oil line opening to prevent oil
   from flowing out.

 Disconnect the auto bystarter, A.C.
 generator, thermosensor wire couplers and
 starter motor wire connectors.
 Disconnect the fuel tube and vacuum tube
 that go to the carburetor from the auto fuel
 valve.
                                                Oil Pump Control Cable    AC Generator Wire
                                                                          Connector

 Remove the spark plug cap.                            Water Hose
 Drain the coolant. ( 3-10)
 Disconnect the water hose.




                                                                             Spark Plug Cap

                                                                                           5-2