new pulsar 125 Workshop-manual : Page 110

          11. FRONT WHEEL/SUSPENSION/
    STEERING                                                             Pulsar     CK   125

                                                                Upper Fork Bridge Mount Bolt
 FRONT FORK
 REMOVAL
 Remove the front wheel. (Refer to 11-6.)
 Remove the four front fender bolts and the
 front fender.
 Loosen the upper and lower fork bridge
 mount bolts and then remove the right and
 left front forks.


                                                 Lower Fork Bridge Mount Bolt


 DISASSEMBLY                                                                    Front Fork Bolt
 Place shop towels under the front fork tube.
 Use a vise to hold the front fork tube and
 remove the bolt.
 When removing the front fork bolt, be
   careful that the spring in the tube may
   spring out.




                                                                   Front Fork Spring
 Remove the front fork spring from the front
 fork tube and compress the spring several
 times to squeeze out the engine oil.




                                                                         6mm Socket Spanner
 Set the front fork bottom tube in a vise and
 place shop towels under it. Remove the
 socket head bolt using a socket spanner.
 · When using the vise, do not tighten the
      front fork bottom tube excessively.
    · If it is difficult to remove the socket
      head bolt, temporarily install the front
      fork spring and front fork bolt.
 Remove the front fork piston and return
 spring. Remove the front fork bottom tube
 and the oil stopper.


                                                                                         11-10