zx scout 50 Workshop-manual : Page 113

          11. CARBURETOR                                                                ZX / SCOUT 50

                                                                     Groove
 Install the throttle valve by aligning the
 groove in the throttle valve with the throttle
 stop screw.




                                                                      Throttle Stop Screw



                                                   Carburetor Cap
 Tighten the carburetor cap.
 After installation, perform the following
 adjustments and inspections.
 · Throttle cable free play ( 3-11)
 · Idle speed adjustment ( 3-8)
 Install the met-in box.




                                                  Throttle Cable
 CARBURETOR REMOVAL
 Remove the met-in box. ( 12-4)
 Remove the air cleaner by removing the air
 cleaner band screw and attaching bolts.
 Disconnect the fuel tube.
 Loosen the drain bolt to drain fuel from the
 carburetor.
 Disconnect the auto bystarter wire
 connector.
 Remove the two carburetor lock nuts.



                                                        Drain Bolt



11-5