agility 50 rs naked 2t Workshop-manual : Page 155

          13. REAR WHEEL/REAR BRAKE/
     REAR SUSPENSION                                             AGILITY RS 50 NAKED


 Apply a small amount of engine oil to the felt
 seal and install it to the brake cam.
 Install the brake arm.
 Align    the wide groove on the wear
   indicator plate with the wide tooth of the
   brake cam.
 Install and tighten the brake arm bolt.
                                                     Return Spring            Brake Arm
    Align the scribed line on the brake arm
    with the punch mark on the brake cam.            Brake Cable              Brake Arm



 Install the brake arm return spring.
 Install the brake arm pin.
 Connect the brake cable and install the
 adjusting nut.
 Install the rear wheel.
 Adjust the rear brake lever free play.




                                                                         Adjusting Nut
                                                                        Upper Mount Bolts



 LEFT REAR SHOCK ABSORBER
 REMOVAL
 Remove the frame body cover.
 Remove the air cleaner case.

 Remove the rear shock absorber upper and
 lower mount bolts.
 Remove the rear shock absorber.
                                                   Rear Shock Absorbers Lower Mount Bolts
                                                  Rear Shock Absorber Compressor

 DISASSEMBLY
 Install the rear shock absorber compressor as
 the figure shown.
 Install  the rear shock absorber lower
   joint into the rear shock absorber
   compressor.
                                                   Loosen the lower joint lock nut.
 Compress the rear shock absorber spring.          Remove the lower joint.
  Special                                          Remove the lock nut, rubber and damper.
 Cushion Assemble & Disassemble Tool                 Cushion Assemble & Disassemble Too

                                                                                          13-4