Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
4. LUBRICATION SYSTEM GRAND DINK 125/150
Pump Cover Hole Screw
Install the pump cover by aligning the hole in
the cover with the dowel pin.
Tighten the screw to secure the pump cover.
Make sure that the pump shaft rotates freely
without binding.
Dowel Pin
Arrow Mark
OIL PUMP INSTALLATION
Install the oil pump and oil separator and
tighten the two bolts.
Make sure that the pump shaft rotates freely.
The arrow of oil pump is upside.
Oil Separator Bolts
Pump Drive Chain Circlip
Install the pump drive chain and driven gear,
then set the circlip securely on the pump
shaft.
Pump Driven Gear
Bolt
Install the oil separator cover properly.
Fit the tab of the separator cover into the
slit in the separator.
Install the A.C. generator starter driven gear.
( 10-5)
Oil Separator Cover
4-6