kpw 50 Workshop-manual : Page 53

          4. FUEL SYSTEM                                                    K-PIPE 50



 FUEL TANK
 FUEL TANK REMOVAL
    Warning
  Keep sparks and flames away from the
  work area.
  Wipe off any spilled gasoline.
 Turn the fuel valve to "OFF".
 Remove the three bolts attaching the rear
 carrier.
 Remove the four seat lock nuts.                          Screw
 Remove the tool box mounting bolt and tool box.
 Disconnect the fuel strainer and remove the nuts on
 the end of the fuel tank.
 Disconnect the fuel unit wire connector and fuel
 gauge wire.
 Remove the fuel tank.




 FUEL STRAINER REMOVAL
 Remove the fuel strainer from the fuel tank.
 INSPECTION
 Inspect if the fuel strainer is clogged and
 clean it with compressed air.
  When        removing the fuel strainer, do not
      allow flames or sparks near the working area
      and drain the residual gasoline into a
      container.

 INSTALLATION
 Install the fuel strainer with its arrow mark
 toward the fuel pump.




 FUEL TANK INSTALLATION
 Install the fuel tank in the reverse order of removal.
 Check that there is no fuel leakage.
 Check the wire connectors for proper
 connection.

                                                          Screw




4-11