7. CYLINDER/PISTON K-XCT 125i CYLINDER AND PISTON REMOVAL Remove the cylinder head (refer to "CYLINDER HEAD" section in the chapter 6). Remove the water hose attached the cylinder. Remove the two cylinder bolts/washers (2). Remove the cylinder. Remove the cylinder gasket (4) and dowel pins (3). (4) Clean any gasket material onto the cylinder surface. (3) Remove the piston pin clip Place a clean shop towel in the crankcase to keep the piston pin clip from falling into the crankcase. Press the piston pin out of the piston and remove the piston . 7-4