14. FRONT WHEEL/FRONT SUSPENSION/ STEERING SYSTEM ATV 300/250 Nuts Cotter Pin FRONT WHEEL HUB REMOVAL AND INSPECTION Place the machine on a level place. Remove the front wheel (page 14-3) and caliper. (page 13-8) Elevate the front wheels by placing a suitable stand under the frame. Support the machine securely so there is no danger of it falling over. Remove the cotter pin. Remove nut attaching the front wheel hub Outside Collar Dust Seal and then remove front wheel hub. DISASSEMBLY Remove the outside collars. Inspect the dust seals for wear or damage. If any defects are found, replace the dust seal with a new one. Remove the dust seals by a flat-head screw driver. Place a wood block against the outer edge to protect this edge. Outside Collar Dust Seal Inspect the bearings for allow play in the Bearing front wheel hub or the wheel turns roughly. 14-4