14. FRONT WHEEL/FRONT SUSPENSION/ STEERING SYSTEM MXU 250R/300R INSPECTION Inspect the handlebar. Cracks/bends/damage Replace. Holder Surface INSTALLATION Install handlebar and handlebar holder, then tighten the four bolts. Torque: 2.5 kgf-m (25 Nm, 18 lbf-ft) Align the mark on the handlebar with the lower handlebar holder surface. Mark Forward Mark · Be sure the upper handlebar holder mark face to front. · First tighten the bolts on the front side of the handlebar holder, and then tighten the bolts on the rear side. 14-19