Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
16. BRAKE SYSTEM MXU 550EXi/MXU 500i
10. Connect a transparent hose to the right
caliper bleed valve and then loosen the
bleed valve nuts.
Use the syringe to draw brake fluid into
it until there is no air bubbles in the
transparent hose.
Then, tighten the bleed valve nut.
Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft)
Connect a transparent hose to the left
caliper bleed valve and then loosen the
Bleed Valve Nut
bleed valve nuts.
Use the syringe to draw brake fluid into
it until there is no air bubbles in the
transparent hose.
Then, tighten the bleed valve nut.
Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft)
· When drawing brake fluid with the
syringe, the brake fluid level should be
kept over 1/2 of the brake reservoir
height (brake pedal).
· Use only the recommended brake fluid.
Recommended Brake Fluid: DOT-4
11. Loosen the rear caliper (combined)
bleed valve nut. Connect the
transparent hose to the bleed valve. Bleed Valve Nut
Use the syringe to draw brake fluid into
it until there is no air bubbles in the
transparent hose.
Then, tighten the bleed valve nut.
Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft)
· When drawing brake fluid with the
syringe, the brake fluid level should be
kept over 1/2 of the brake reservoir
height (brake pedal).
· Use only the recommended brake fluid.
Recommended Brake Fluid: DOT-4
16-20