Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
3. INSPECTION/ADJUSTMENT MXU 550EXi/MXU500i
Wrench Thickness Gauge Valve Adjusting
Adjust by loosening the valve adjusting
screw lock-nut and turning the adjusting
screw until there is a slight drag on the
thickness gauge.
Valve clearance (when cold):
IN.: 0.1 mm
EX.: 0.1 mm
Apply oil to the valve adjusting screw lock-
nut threads and seating surface.
Hold the adjusting screw and tighten the Lock Nut
lock nut.
Special tool:
Valve adjusting wrench A120E00080
Torque: 0.9 kgf-m (9 N-m)
After tightening the lock nut, recheck the
valve clearance.
Install the removed parts in the reverse
order of removal.
IDLE SPEED INSPECTION
The engine must be warm(80°C over)
for accurate idle speed inspection
Warm up the engine before this operation.
Start the engine and connect a tachometer
or kymco diagnostic tool.
attached the specified idle speed.
Idle Speed: 1400100 rpm
Idle Speed
3-11