people 250 s 2 Workshop-manual : Page 150

          12. COOLING SYSTEM                                                         PEOPLE/PEOPLE S 250


                                                                    Nuts            Radiator
 RADIATOR INSTALLATION
 Install the radiator on the radiator bracket
 with the two bolts and two nuts.




                                                                      Bolts
                                                   Upper Hose              Thermostatic Switch
 Connect the upper and lower hoses and
 secure them with hose bands.
 Connect the thermostatic switch wire.




                                                   Thermostatic Switch Wire         Lower Hose

 Connect the fan motor wire couplers.                               Air Vent Tube
 Connect the overflow tube and secure with
 the tube clamp.
 Fill the radiator with coolant. ( 3-9)
 Connect the vent tube to the radiator filler.
 After installation, check for coolant leaks.


  If you want to refill the coolant , the
     following procedure must be checked.
     1. Please make the radiator filler and the
        air vent tube to be separated.                   Overflow Tube Fan Motor Wire Coupler
     2. Then start the engine , filled in the
        coolant till the coolant flowed out from                        Outlet Tube of Reserve
        the air vent tube.                                              T k
     3. Put the air vent tube on.


 Connect the outlet tube of the reserve tank
 and secure with the tube clamp.




                                                                                         12-8