Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
5. ENGINE REMOVAL/INSTALLATION PEOPLE/PEOPLE S 250
ENGINE REMOVAL
Drain the coolant. ( 3-9)
Remove the met-in box, carrier. ( 2-6)
Remove the frame body cover, center cover
and rear fender A together. ( 2-6)
Remove the exhaust muffler. ( 2-10)
Disconnect all of the A.C. generator.
A.C. Generator Wire Connectors
Remove the nut to disconnect the starter Nut Starter Motor Wire
motor wire that goes to the starter relay.
Starter Relay
Secondary Air Air Inlet Hose
Vacuum Tube Inlet Pipe (V-belt Chamber)
Disconnect the secondary air vacuum tube
and fuel pump vacuum tube from inlet pipe.
Disconnect the air inlet hose (v-belt chamber)
from frame.
Fuel Pump Vacuum Tube
Intake Manifold Radiator Air
Band Thermostat Ventilated Tube
Loosen the intake manifold band (air cleaner
tube and inlet pipe).
Disconnect the radiator air ventilated tube
and thermosensor wire coupler from
thermostat.
Thermosensor Wire Coupler
5-2