1. GENERAL INFORMATION SPECIFICATIONS Name & Model No. SH10AA Air cleaner type & No Paper element, wet Fuel System Overall length 1950mm Lubrication oil capacity 1.5 liters Overall width 735mm Fuel capacity 10 liters Carburetor Overall height 1180mm Type Wheel base 1350mm Piston dia. Engine type Water cooled 2stroke Venturi dia. 14 equivalent Displacement 49.4cc Fuel Used 92# nonleaded gasoline Type CDI Electrical Equipment Ignition System Front wheel 45 Ignition timing 13.5°/2000rpm Net weight (kg) Rear wheel 61..5 Total 106.5 Front wheel 80 Spark plug NGK Gross weight(kg) Rear wheel 149 BR6HSA Total 229 Front wheel 110/70-12 Spark plug gap 0.60.7mm Tires Rear wheel 130/70-12 Battery Capacity 12V4AH Ground clearance 155mm Clutch Type Dry multi-disc clutch Power Drive System sion Gear Gear Transmis- Reduction Perform- Braking distance (m) 4.4m /30km/HV Type Non-stage transmission ance Min. turning radius 2150mm Operation Automatic centrifugal Starting motor & type Starting system kick starter Type Gasoline,2-stroke Type Two-stage reduction Cylinder arrangement Single cylinder Reduction 1st Combustion chamber type Semi-sphere ratio 2nd Bore x stroke (mm) 39 x 41.4 Front Caster angle Moving Device Compression ratio 7.2:1 Axle Connecting rod Compression pressure (kg/cm-rpm) 11.8 Tire pressure Front 1.75 Max. output (ps/rpm) 5.7/7000 (kg/cm) Rear 2.25 Engine Max. torque (kg m/rpm) 0.6/6500 Turning Left 42.5° Intake Open Automatic controlled angle Right 42.5° Port (1mm) Close Automatic controlled Brake system Front Disk brake timing Exhaust Open type Rear Expanding (1mm) Close Front Telescope Suspension Device Damping Valve Intake type Rear Unitswing clearance (cold) Exhaust Shock absorber Front Telescope Idle speed (rpm) 2000100rpm type Double swing Rear Lubrication type Separate type System Lubrication Frame type Under bone Oil pump type Plunger type Oil filter type Full-flow filtration Oil capacity 1.1 liters Cooling Type Water cooling 1-2