17. LIGHTS/INSTRUMENTS/SWITCHES SUPER8 125 HEADLIGHT Screw Front Cover Bolts REMOVAL Remove the screw on the front cover. Remove the two screws on the back of the front cover. Remove the front cover. Remove the two bolt and twelve screws attaching the R/L mole side. Remove the R/L mole side The installation sequence is the reverse of removal. · Align the tab on the headlight with the groove on the handlebar cover. Screws · After installation, adjust the headlight beam. ( 3-9) BULB REPLACEMENT Remove the headlight bulb Coupler. ( 2-2) Remove the headlight replace with new bulbs. The installation sequence is the reverse of removal. Headlight Bulb Coupler TAILLIGHT/STOPLIGHT/REAR TURN SIGNAL LIGHT/LICENSE LIGHT Remove the two screws attaching the rear protector molding. Remove the rear protector molding and remove the two nuts attaching the rear light shell. Remove the rear turn signal light bulb and replace with a new one. The installation sequence is the reverse of removal. Nuts 17-5