super 8 50 2t 1 Workshop-manual : Page 43

          3. INSPECTION/ADJUSTMENT                                                  SUPER8 50 2T

 ELECTRICAL EQUIPMENT
 IGNITION APPARATUS
                                                                              0.6-0.7mm
 Spark Plug                                       Gap, Wear and
                                                  Fouling Deposits
 Remove the frame center cover.
 Remove the spark plug cap and spark plug.
 Check the spark plug for wear, fouling and
 carbon deposits.
 Remove the fouling and carbon deposits
 with a spark plug cleaner or wire brush.               Cracks           Washer Damage
 Specified Spark Plug
                                                      Cracks
               NGK
             SF10JA
             BR8HSA

 Spark Plug Gap: 0.60.7mm
 Ignition Apparatus                                     Fan
The     CDI ignition timing is not adjust-
   able. If the timing is incorrect, check
   the CDI unit, ignition coil and A.C.
   generator and replace any faulty parts.

 Remove the right side rail. ( 12-4)
 Remove the A.C. generator fan cover.
 ( 7-3)
 Remove the three bolts attaching the fan
 cover and then remove the fan cover.
 Warm up the engine and check the ignition
 timing with a timing light.




 When the engine is running at the specified                     Index Mark
 rpm, the ignition timing is correct if the "F"
 mark on the flywheel aligns with the index
 mark on the crankcase within 1.5°.
 Ignition Timing:
  13.5°1°BTDC/2000rpm




                                                      F Mark


                                                                                      3-8