Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
15. ELECTRICAL EQUIPMENT SUPER 9 50
RESISTOR INSPECTION
Remove the front upper/lower cover. ( 2-3)
Measure the resistance between the resistor B
pink wire and ground.
Measure the resistance between the resistor A
green/black wire and ground.
Resistances:
Resistor A: 9.910.5
Resistor B: 5.66.2
Faulty resistor is the cause of faulty
operation of the auto bystarter.
REGULATOR/RECTIFIER
INSPECTION Resister A Resister B
Remove the front upper/lower cover. ( 2-3)
Disconnect the regulator/rectifier wire
Bolt
coupler and remove the bolt to remove the
regulator/rectifier.
Measure the resistances between the
terminals.
Replace the regulator/rectifier if the readings
are not within the specifications in the table
below.
· Due to the semiconductor in circuit, it
is necessary to use a specified tester
for accurate testing. Use of an
improper tester in an improper range
may give false readings.
· Use a Sanwa Electric Tester (07208- Coupler Regulator/Rectifier
0020000) or Kowa Electric Tester
(TH-5H). The proper range for
testing is listed below.
A (Red) C (Yellow)
Model Brand Range
SP-10D Sanwa K
TH-5H Kowa 100
Probe
Probe(-) A (R) B (W) C (Y) D (G)
A (R)
B (W) 3-10K
C (Y) 33-
35K
D (G) 33-
35K
B (White) D (Green)
15-6