super 9 3 Workshop-manual : Page 132

          11. COOLING SYSTEM                                                          SUPER 9        50


 Install the dowel pins and then install the                              Water Pump Assembly
 water pump assembly to the right
 crankcase.
 Tighten the three bolts to secure the water
 pump assembly.
 Install the two timing cap bolts and the
 timing cap.

 When installing the water pump
    assembly, aligning the tab on the water
    pump shaft with the groove on the A.C.
    generator nut.




                                                                  Bolts
 WATER PUMP/IMPELLER                            Mechanical Seal       Seal Washer (Porcelain)
 INSTALLATION
 When the mechanical seal is replaced, a
 new seal washer must be installed to the
 impeller.
 Install the impeller onto the water pump
 shaft.
 Torque: 9.813.72N-m
  The impeller has left hand threads.



                                                    Dowel Pins                       Impeller

                                                             Water Pump Cover
 Install the two dowel pins and a new gasket.
 Install the water pump cover and tighten the
 three bolts.
 Torque: 7.8411.76N-m




                                                     Bolts


11-11