Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
15. ELECTRICAL EQUIPMENT SUPER 9 50
CDI UNIT INSPECTION Coupler
Open the front tool box and remove the bolt.
Remove the front tool box. ( 2-4)
Disconnect the CDI coupler and remove the
CDI unit.
CDI Unit
CDI CIRCUIT INSPECTION
Measure the resistance between the terminals.
Replace the CDI unit if the readings are not Black/ Yellow Green
within the specifications in the table below.
· Due to the semiconductor in circuit, it is
necessary to use a specified tester for
accurate testing. Use of an improper
tester in an improper range may give
false readings.
· Use a Sanwa Electric Tester or Kowa
Electric Tester (TH-5H).
· In this table, "Needle swings then
returns" indicates that there is a charging
current applied to a condenser. The needle
will then remain at "" unless the
condenser is discharged.
Blue/ Yellow Black/ Blue
Use the x K range for the Sanwa Tester.
Use the x 100 range for the Kowa Tester.
Unit: K
Probe
Black/ Blue/ Green Black/
(-)Probe Blue Yellow Yellow
Black/
1~100
Blue
Blue/
100~ 1~100
Yellow
Green 1~
Black/
1~100 0.1~50
Yellow
15-10