Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
12. CARBURETOR VITALITY 50
AUTO BYSTARTER INSPECTION
Measure the resistance between the auto
bystarter wire terminals.
Resistance: 10 (10 minutes minimum
after stopping the engine)
If the reading is not within the limit, replace
the auto bystarter with a new one.
Connect a hose to the fuel enriching circuit
of the carburetor. Connect the auto
bystarter green/black wire to the positive (+)
terminal of a battery and black/white wire
to the negative (-) terminal. Wait 5 minutes
and blow the hose with mouth. If the
passage is blocked, the auto bystarter is
normal.
Disconnect the auto bystarter from the
battery. Wait 30 minutes and blow the hose
with mouth. If air can be blown into the
hose, the auto bystarter is normal.
Bystarter Cap Bystarter Screw
AUTO BYSTARTER REMOVAL
Remove the bystarter cap.
Remove the one set plate screw and set
plate and then remove the auto bystarter
from the carburetor body.
Set Plate
12-20