17. LIGHTS/INSTRUMENTS/SWITCHES FILLY LX 50 STOP SWITCH INSPECTION Remove the handlebar front cover. ( 2-2) Disconnect the front stop switch wire coupler. Check for continuity between the wire terminals when the front brake lever is applied. The switch is normal if there is continuity. Disconnect the rear stop switch wire coupler. Check for continuity between the wire terminals when the rear brake lever is applied. The switch is normal if there is continuity. Coupler HORN INSPECTION Remove the front covers. ( 2-2) Disconnect the horn wire coupler. The horn is normal if it sounds when a 12V battery is connected across the horn wire terminals. REPLACEMENT Disconnect the horn wire coupler. Remover the two bolts attaching the horn. Remove the horn. The installation sequence is the reverse of removal. Instruments INSTRUMENTS Remove the handlebar front cover. ( 2-2) Remove the handlebar rear cover. ( 2-2) Disconnect the handlebar switch couplers. Remove the three screws to remove the instruments. Install a new horn in the reverse order of removal. Screws 17-4