agility 50 city 2t Workshop-manual : Page 154

          15. ELECTRICAL EQUIPMENT                                        AGILITY CITY 50 2T

                                                  Resister
 RESISTOR INSPECTION
 Remove the frame front cover. ( 12)
 Measure the resistance between             the
 resistor with ground.

 Resistances:
  Resistor: 4.55.5


   Faulty resistor is the cause of faulty
   operation of the auto bystarter.




 REGULATOR/RECTIFIER INSPECTION
 Remove the front cover. ( 12)
 Disconnect the regulator/rectifier wire
 coupler and remove the bolt to remove the
 regulator/rectifier.

 Measure the resistances between the
 terminals.
 Replace the regulator/rectifier if the
 readings are not within the specifications in
 the table below.

   · Due to the semiconductor in circuit, it
     is necessary to use a specified tester
     for accurate testing.     Use of an
     improper tester in an improper range
     may give false readings.
                                                  Regulator/Rectifier
   · Use a Sanwa Electric Tester (07208-
     0020000) or Kowa Electric Tester
     (TH-5H).        The proper range for
     testing is listed below.
                                                                Black            Green
                                                   Pink
     Model          Brand          Range
    SP-10D          Sanwa            K
    TH-5H           Kowa            100




                                                     Red                Yellow




                                                                                   15-6