Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
2. INSPECTION/ADJUSTMENT Pulsar CK 125
Upper Limit
ENGINE OIL
Place the motorcycle on its main stand
on level ground for oil level check.
After the engine is stopped for 10 minutes,
check if the oil level is between the upper and
lower limits on the dipstick.
If the oil level is low, add the recommended
oil to the proper level.
Recommended Oil: SAE30W#
When changing engine oil, be sure to tighten Lower Limit Oil Filter Screen Cap
the drain bolt securely.
Check the drain bolt washer for damage.
Oil Capacity:
Full capacity : 1.0 liter
At change : 0.9 liter
Oil Filter Screen Cleaning
Remove the oil filter screen cap.
Remove the oil filter screen and spring.
Then, clean the oil filter screen with
compressed air.
Be careful not to install the oil filter Oil Filter Screen
screen in the reverse direction to avoid
engine damage.
Spring
Index Mark
DRIVE CHAIN
Check the drive chain slack.
Specified Slack: 12cm
Drive Chain Adjustment:
1. First loosen the rear axle nut.
2. Adjust the right and left chain adjusting
nuts to align the right and left index
marks with the punch marks on the chain
adjusters.
3. Turn the rear wheel to see if the drive Rear Axle Adjusting Nut
chain slack is within the specified range.
4. Tighten the rear axle nut.
After drive chain adjustment, check the
rear brake pedal free play and adjust if
necessary.
2-7