10. A.C. GENERATOR/STARTER CLUTCH Downtown 300i ABS STATOR INSTALLATION Install the A.C. generator stator on the right Screws crankcase cover and secure it with the three bolts. Install the pulsar coil on the right crankcase cover and secure it with the two screws. Install the wire grommet in the groove in the right crankcase cover securely. Be sure to route the stator wire under the pulsar coil. Pulsar Coil A.C. Generator Stator RIGHT CRANKCASE COVER INSTALLATION Gasket Install the two dowel pins and a new gasket. Install the right crankcase cover over the crankcase, aligning the water pump shaft groove with the oil pump shaft. Dowel Pins Right Crankcase Cover Tighten 12 bolts attaching to right crankcase cover. Connect the water hoses to the right crankcase cover and water pump cover. Add the recommended engine oil. Fill the cooling system with the specified coolant. · Be sure to bleed air from the water Water Pump Shaft Water Hose hose after filling the coolant. 10-9