kxr 50 90 Workshop-manual : Page 221

          14. BATTERY/CHARGING SYSTEM/
     A.C. GENERATOR                                                   Mongoose/KXR 90/50


 A.C. GNERATOR INSTALLATION



                                                 Flywheel
                  Woodruff Key                          3.54.5kgf-m
                                                                  Cooling Fan


                                                                  0.61.0kgf-m Fan Cover




                                                 0.450.6kgf-m




   A.C. Generator       Stator
   Wire Rubber
   Sleeve


 Reverse the A.C. GENERATOR
 REMOVE" procedures.
 Install the A.C. generator stator and pulser
 coil onto the right crankcase.
 Install the A.C. generator wire rubber
 sleeve.
 Tighten the stator and pulser coil bolts.
 Torques: Pulser Coil : 0.45~0.6kgf-m
                    Stator: 0.8~1.2kgf-m

 Connect the A.C. generator wire connector.

 Clean the taper hole in the flywheel off any
 burrs and dirt.
 Install the woodruff key in the crankshaft
 keyway.
 Install the flywheel onto the crankshaft with
 the flywheel hole aligned with the
 crankshaft woodruff key.
 The inside of the flywheel is magnetic.
    Make sure that there is no bolt or nut
    before installation.                                     Woodruff Key




                                                                                   14-10