kxr maxxer 250 300 Workshop-manual : Page 53

          3. INSPECTION/ADJUSTMENT                                               ATV 300/250

                                                   Tie-rod End Nuts
 · Be sure that both tie-rod are turned the
     same amount. If not, the machine will
     drift tight or left even though the
     handlebar is positioned straight which
     may lead to mishandling and accident.
   · After setting the toe-in to specification,
     run the machine slowly for some
     distance with hands placed lightly on
     the handlebar and check that the
     handlebar responds correctly. If not,
     turn either the right or left tie-rod
     within the toe-in specification.                                   Tie-rod



 WHEELS/TIRES
 Check the tires for cuts, imbedded nails or
 other damages.
 Check the tire pressure.

 Tire pressure should be checked when
    tires are cold.




 TIRE PRESSURE                                         Rear Axle Nut

                            1 Rider
    Front       0.28 kgf/cm (28 Kpa, 3.2 psi)
    Rear        0.28 kgf/cm (28 Kpa, 3.2 psi)

 TIRE SIZE
 Front : 21*7-10
 Rear : 20*11-9


                                                     Front Axle Nut
 Check the front axle nut for looseness.
 Check the rear axle nut for looseness.
 If the axle nuts are loose, tighten them to the
 specified torque.
 Torque:
         Front: 7 kgf-m (70 N-m, 50 lbf-ft)
         Rear: 10 kgf-m (100 N-m, 72 lbf-ft)



                                                                                  3-14