Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
5. FUEL SYSTEM ATV 300/250
Screws Control Shaft Washer
DISASSEMBLY
Remove the two screws on the retaining ring
and then remove retaining ring.
Remove the washer and control shaft.
Retaining Ring
Rubber Gasket Fuel Valve Body
Remove the rubber gasket from the fuel
valve body.
INSPECTION
Inspect the fuel valve body for dirt and clog.
Clean if necessary.
Replace the rubber gasket with new ones if
they are damaged or deteriorated.
Replace the O-rings with new ones if they Control Shaft O-ring
are damaged or deteriorated.
Tab Tab
ASSEMBLY
Reverse the "DISASSEMBLY" procedures.
Install rubber gasket, control shaft, washer
and retaining ring.
· Aligning the tab on the control shaft
with the outlet duct in the fuel valve
body.
· Aligning the tab on the retaining ring
with the outlet duct in the fuel valve
body.
Outlet Duct Outlet Duct
5-5