Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
3. INSPECTION/ADJUSTMENT ATV 150/125
GEAR OIL CHANGE
Remove the oil filler bolt.
Removes the oil drains bolt and drain the oil
thoroughly.
Install the oil drain bolt.
Torque: 1 kgf-m (10 N-m, 7.2 lbf-ft)
Make sure that the sealing washer is in
good condition.
Fill with the recommended oil.
Oil Capacity:
At disassembly: Oil Drain Bolt/ Sealing Washer
400 cc (0.352 lmp qt, 0.424 US qt)
At change:
200 cc (0.176 lmp qt, 0.212 US qt)
Reinstall the oil filler bolt and check for oil
leaks.
Torque: 1 kgf-m (10 N-m, 7.2 lbf-ft)
DRIVE BELT
Remove the left crankcase cover.
Inspect the drive belt for cracks, scaling,
chipping or excessive wear. Drive Belt
Measure the V-belt width
Service limit: 17 mm (0.68 in)
Wear Indicator
Replace the drive belt if out of specification.
BRAKE SHOE
Replace the brake shoes if the arrow on the
wear indicator plate aligns with the punch
mark on the brake panel when the brake is
fully applied.
Punch Mark
BRAKE SYSTEM
FRONT BRAKE
Measure the front brake lever free play.
Free Play: 1020 mm (0.40.8 in)
Adjust if out of specification.
3-9