13. BRAKE SYSTEM MXU 300/250 Fluid Tube Bolt BRAKE MASTER CYLINDER DISASSEMBLY Remove the brake reservoir cover Drain the brake fluid from the hydraulic brake system. (page 13-4) Do not splash brake fluid onto any rubber, plastic and coated parts. When working with brake fluid, use shop towels to cover these parts. Stop Light Switch Wire Remove fluid tube bolt and then disconnect the fluid tube. When removing the brake fluid tube bolt, be sure to place towels under the tube and plug the tube end to avoid brake fluid leakage and contamination. Disconnect the stop light switch wires. Bolts Remove the two master cylinder holder bolts and remove the master cylinder. Snap Ring Remove the brake lever bolt and the brake lever. Remove the piston rubber cover and snap ring from the brake master cylinder. Snap Ring Pliers (Close) 13-6