19. LIGHTS/SWITCHES MXU 300/250 Rubber Boot BULBS REMOVAL HEADLIGHT Remove the front fender. (See page 2-8) Remove the rubber boot from the headlight case. Disconnect the headlight wire connector. Headlight Connector Lock Clip Lock Clips Relax the lock clips to remove the bulb and replace with a new one. Install the bulb, aligning the bulb socket groove with the bulb tab and set the lock clips. Connect headlight wire connector. Install the rubber boot. Install the front fender in the reverse order of removal. POSITION LIGHT Remove the bulb socket by pulling it out. Remove the bulb. Install the bulb in the reverse order of removal Bulb Socket 19-2