10. A.C. GENERATOR/STARTER CLUTCH PEOPLE/PEOPLE S 250 Water Pump Cover RIGHT CRANKCASE COVER REMOVAL Disconnect the water hoses from the water pump cover. ( chapter 5) Disconnect the water hoses from the right crankcase cover. Remove the nine bolts attaching the right crankcase cover and the cover. Remove right crankcase cover. Bolts Water Hose RIGHT CRANKCASE COVER Bolts REMOVAL(ENGINE INSTALLED) Remove met-in box and frame body cover. ( 2-6) Disconnect the water hoses from the water pump cover. ( chapter 5) Disconnect the water hoses from the right crankcase cover. ( chapter 5) Disconnect A.C. generator wire coupler and oil pressure switch wire. ( chapter 5) Remove the eight bolts attaching the right crankcase cover and the cover. Remove the left and right rear shock absorber Bolt Water Pump Cover lower mount bolts. ( chapter 5) Elevate the back of engine as possible by placing a suitable stand under the back of engine. Remove the bolt between water pump cover and oil filter screen cap. Remove right crankcase cover. Support the machine securely so there is no danger of it falling over. Oil Filter Screen Cap STATOR REMOVAL A.C. Generator Stator Screws Remove the two pulser coil attaching screws and the pulser coil. Remove the three A.C. generator stator bolts and the stator. When removing the pulser coil and stator, be careful not to damage them to avoid shorted or broken wire. Bolts Pulser Coil 10-3