18. STARTING SYSTEM PEOPLE/PEOPLE S 250 STARTER CLUTCH INSPECTION Refer to pages 10-4 and 10-5 for the starter clutch removal, inspection and installation. STARTER RELAY INSPECTION Disconnect the starter relay wire connector. Check for continuity between the yellow/red wire terminal and ground. There should be continuity when the starter button is depressed. If there is no continuity, check the starter button for continuity and inspect the wire. Yellow/Red Wire Starter Relay OPERATION TEST Connect the electric tester to the starter relay larger terminals that connect to the battery positive cable and the starter motor cable. Connect a fully charged battery across the starter relay yellow/red and green/yellow wire terminals. Check for continuity between the starter relay large terminals. The relay is normal if there is continuity. 18-6