5. ENGINE REMOVAL/INSTALLATION PEOPLE/PEOPLE S 250 ENGINE REMOVAL Drain the coolant. ( 3-9) Remove the met-in box, carrier. ( 2-6) Remove the frame body cover, center cover and rear fender A together. ( 2-6) Remove the exhaust muffler. ( 2-10) Disconnect all of the A.C. generator. A.C. Generator Wire Connectors Remove the nut to disconnect the starter Nut Starter Motor Wire motor wire that goes to the starter relay. Starter Relay Secondary Air Air Inlet Hose Vacuum Tube Inlet Pipe (V-belt Chamber) Disconnect the secondary air vacuum tube and fuel pump vacuum tube from inlet pipe. Disconnect the air inlet hose (v-belt chamber) from frame. Fuel Pump Vacuum Tube Intake Manifold Radiator Air Band Thermostat Ventilated Tube Loosen the intake manifold band (air cleaner tube and inlet pipe). Disconnect the radiator air ventilated tube and thermosensor wire coupler from thermostat. Thermosensor Wire Coupler 5-2