super 8 125 Workshop-manual : Page 180

          17. LIGHTS/INSTRUMENTS/SWITCHES                                      SUPER8 125



 STOP SWITCH
 INSPECTION
 Remove the handlebar front cover. ( 2-2)
 Disconnect the front stop switch wire
 coupler.
 Check for continuity between the wire
 terminals when the front brake lever is
 applied. The switch is normal if there is
 continuity.
 Disconnect the rear stop switch wire coupler.
 Check for continuity between the wire
 terminals when the rear brake lever is applied.
 The switch is normal if there is continuity.


                                                                          Coupler

 HORN
 INSPECTION
 Remove the front covers. ( 2-2)
 Disconnect the horn wire coupler.
 The horn is normal if it sounds when a 12V
 battery is connected across the horn wire
 terminals.
 REPLACEMENT
 Disconnect the horn wire coupler.
 Remover the two bolts attaching the horn.
 Remove the horn.
 The installation sequence is the reverse of
 removal.



                                                   Instruments

 INSTRUMENTS
 Remove the handlebar front cover. ( 2-2)
 Remove the handlebar rear cover. ( 2-2)
 Disconnect the handlebar switch couplers.
 Remove the three screws to remove the
 instruments.
 Install a new horn in the reverse order of
 removal.



                                                                 Screws




                                                                                    17-4