3. INSPECTION/ADJUSTMENT VITALITY 50
ENGINE OIL (4-STROKE) Dipstick/Oil Filler Cap
OIL LEVEL
Place the scooter on a level place.
Warm up the engine for several minutes
and stop it.
Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.
Run the engine for 23 minutes and
check the oil level after the engine is
stopped for 23 minutes.
Remove the dipstick and inspect the oil
level.
The oil level should be between the
maximum and minimum marks. If the level
is low, add oil to raise it to the proper level.
ENGINE OIL REPLACEMENT
Place the scooter on a level place.
Warm up the engine for several minutes
and stop it.
Place a container under the engine.
Remove the oil filler cap (1)and drain plug
(2) to drain the oil.
Reinstall the drain plug and tighten the
drain plug to specification.
Torque: 2.03.0kgf-m
Fill the engine with oil and install the oil
filler cap.
Warm up the engine for several minutes at
idle speed. Check for oil leakage while
warming up.
Be sure no foreign material enters the
crankcase.
Oil Capacity: At disassembly: 0.85L
At change: 0.7L
3-8
Fast delivery and good communication ! The parts fit perfectly ! Thank you very much ! 
4.7 / 5