agility 50 2 Workshop-manual : Page 102

          9. DRIVE AND DRIVEN PULLEYS/
   KICK STARTER                                                     AGILITY 50
                                                    Movable Drive Face
 INSTALLATION
 Install the drive pulley collar and movable
 drive face onto the crankshaft.




                                                                    Drive Pulley Collar

 Set the drive belt on the drive pulley collar.
 Install the drive pulley face and tighten the
 drive face nut. ( 9-6)
 Torque: 5.5~6.5kgf-m
 Do not get oil or grease on the drive belt
    or pulley faces.




 STARTER PINION
 REMOVAL
 Remove the left crankcase cover.
 Remove the drive pulley.
 Remove the starter pinion holder.
 Remove the starter pinion.

 INSPECTION
 Inspect the starter pinion shaft forcing part
 for wear or damage.
 Inspect the starter pinion for smooth
 operation.                                                       Starter Pinion
 Inspect the starter pinion and shaft for wear                 Starter Pinion Shaft
 or damage.

 INSTALLATION
 Apply a small amount of grease to the starter
 pinion shaft and install it in the reverse order
 of removal.




                                                                                      9-8