agility 50 2 Workshop-manual : Page 157

          14. BATTERY/CHARGING SYSTEM/
     A.C. GENERATOR                                                     AGILITY 50

 A.C. GENERATOR CHARGING                           Charging Coil Wire
 COIL
 The inspection of A.C. generator charging
    coil can be made with the engine installed.
 INSPECTION
 Disconnect the A.C. generator 2P connector.
 Measure the resistance between the A.C.
 generator white wire and engine ground with
 an electric tester.
 Standard: 0.21.2(at 20)
 Replace the A.C. generator charging coil if
 the reading is not within the specifications.

 A.C. GENERATOR LIGHTING
 COIL
 The inspection of A.C. generator lighting
    coil can be made with the engine installed.
 INSPECTION
 Disconnect the A.C. generator 2P connector.
 Measure the resistance between the A.C.
 generator yellow wire and engine ground
                                                   Lighting Coil Wire
 with an electric tester.
 Standard: 0.11.0 (20)
 Replace the A.C. generator lighting coil if the
 reading is not within the specifications.

 RESISTOR INSPECTION
 Remove the front covers. ( 2-2)
 Measure the resistance between the resistor
 lead and engine ground.
 Resistances: 5W12: 1113
               30W7.5: 68



                                                                            Resistor

 A.C. GENERATOR
 REMOVAL
 Remove the right side cover. ( 2-4)
 Remove the four bolts attaching the cooling
 fan cover to remove the fan cover.




                                                   Fan Cover
                                                                                14-6