agility 50 rs naked 2t Workshop-manual : Page 143

          12. FRONT WHEEL/FRONT BRAKE/
    FRONT SUSPENSION                                               AGILITY RS 50 NAKED


 Place the brake master cylinder on the
 handlebar and install the holder with "up"          Bolts            Punch Mark
 mark facing up. Be sure to align the punch
 mark with the holder joint.
 First tighten the upper bolt and then tighten
 the lower bolt.
 Torque: 3.04.0kgf-m




                                                                           "Up" Mark




 Install the brake fluid pipe with the attaching
 bolt and two sealing washers.

 Install the handlebar covers. ( 12-3)
 Fill the brake reservoir with recommended
 brake fluid to the upper limit and bleed air
 according to the method stated in 12-10.




                                                   Brake Caliper               Bleed Valve



 BRAKE CALIPER (FRONT)
 Removal
 Remove the brake caliper.
 Place a clean container under the brake
 caliper and disconnect the brake fluid pipe
 from the caliper.

   Do not spill brake fluid on any coated
   surfaces.



                                                    Bolt                       Bleed Valve




12-13