20. LIGHTS/METERS/SWITCHES K-XCT 125i SERVICE INFORMATION GENERAL A halogen head light bulb becomes very hot while the head light is turned on, and remains for a while after it is turned off. Be sure to let it cool down before servicing. Note the following when replacing the halogen headlight bulb -Wear clean gloves while replacing the bulb. Do not put finger prints on the headlight bulb, as they may create hot spots on the bulb and cause it to fail. -If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure. -Be sure to install the dust cover after replacing the bulb. Check the battery condition before performing any inspection that requires proper battery voltage. A continuity test can be made with the light switches installed on the scooter. Route the wires and cables properly after servicing each component. 20-1