13. BRAKE SYSTEM ATV 300/250
Bleed Valve (Front Left Lever)
Connect a transparent hose to the brake
caliper bleed valve and then loosen the
bleed valve nut.
Use a syringe to draw the brake fluid out
through the hose.
Bleed Valve (Pedal)
BRAKE FLUID REFILLING Bleed Valve (Front Left Lever)
Connect a transparent hose and syringe to
the brake caliper bleed valve and then
loosen the bleed valve nut.
Fill the brake reservoir with brake fluid and
use the syringe to draw brake fluid into it
until there is no air bubbles in the hose.
Then, tighten the bleed valve nut.
Torque: 0.6 kgf-m (6 N-m, 4.32 lbf-ft)
· When drawing brake fluid with the
syringe, the brake fluid level (pedal)
should be kept over 1/2 of the brake Reservoir (Front Left Lever) Bleed Valve (Pedal)
reservoir height. Reservoir Cover (Pedal)
· Use only the recommended brake fluid.
Recommended Brake Fluid: DOT-4
Reservoir (Pedal) Reservoir Protection Cover
BRAKE SYSTEM BLEEDING
Connect a transparent hose to the bleed
valve and fully apply the brake lever (pedal)
after continuously pull it several times.
Then, loosen the bleed valve nut to bleed air
from the brake system. Repeat these steps
until the brake system is free of air.
When bleeding air from the brake system,
the brake fluid level (pedal) should be
kept over 1/2 of the brake reservoir
h i h Brake Pedal Bleed Valve (Pedal)
13-12
An excellent service and not too long too wait for the part to be delivered. I live in Germany and its not easy to get spare parts here. I hope not to need your services again but if I do I will have no hesitation in doing so. John W. Parmley 
4.7 / 5