3. INSPECTION/ADJUSTMENT ATV 300/250 Inspection Window (Rear Brake Pedal) Adjust Screw HEADLIGHT AIM Turn the ignition switch ON and start the engine. Turn on the headlight switch. Adjust the headlight aim by turning the headlight aim adjusting screw. STEERING SYSTEM INSPECTION Place the machine on a level place. Check the steering column bushings and bearings: Move the handlebar up and down, and/or back and forth. Replace the steering column bushings and or bearings if excessive play Check the tie-rod ends Turn the handlebar to the left and/or right until it stops completely, then slightly move the handlebar from left to right. Replace the tie-rod ends if tie-rod end has any vertical play. Tie-rod Ends 3-12