like 200 i Workshop-manual : Page 147

          14.STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK                                                           LIKE 200i

                                                     Fixed-Reed



    Install the brake pads in the reverse order of
    removal.
    Tighten the brake pad pin bolt.
    Torque: 1.52.0kg-m

      Keep grease or oil off the brake pads to
      avoid brake failure.

                                                            Brake Pads




    BRAKE DISK
    Measure the brake disk thickness.
    Service Limit: 3.0mm
    Measure the brake disk runout.
    Service Limit: 0.3mm




    BRAKE MASTER CYLINDER
    REMOVAL
    First drain the brake fluid from the hydraulic
    brake system.
 · When servicing the brake system, use
        shop towels to cover rubber and plastic
        parts and coated surfaces to avoid              Master Cylinder
        being contaminated by brake fluid.
      · When removing the brake fluid tube
        bolt, be sure to plug the tube end to
        avoid brake fluid leakage.

    DISASSEMBLY
    Remove the piston rubber cover and snap
    ring from the brake master cylinder.




                                                                  Snap Ring

9