Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
5. FUEL INJECTION SYSTEM
MOVIE S 150i
Check Engine Lamp (CELP)
SELF-DIAGNOSTIC
PROCEDURES WITHOUT
DIAGNOSTIC TOOL
SELF-DIAGNOSTIC PROCEDURES
Place the scooter on its main stand.
Put the side stand up and the engine stop
switch is at "RUN".
Turn the ignition switch "ON", the CELP
will blink twice then off. It shows the
CELP working normally.
CELP turn off for 5 seconds. The "CELP"
will start blinking if the ECU has failure
code.
No matter when the "CELP" light or
blink during riding, should directly go
to workshop to find the cause of the
problem.
SELF-DIAGNOSIS RESET (CLEAR
FAILURE CODES) PROCEDURE
1. Put the side stand up and engine stop
switch is at "RUN".
2. Turn the key to the ON position and wait
for ten seconds.
3. Fully open the throttle and wait for ten
seconds.
4. Release the throttle
5. The indicator will blink quickly two times
and then stop.
The self-diagnosis could not be reset if
there's still trouble in the system.
5-25