Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
5. FUEL INJECTION SYSTEM
MOVIE S 150i
Screws
FUEL PUMP REMOVAL
Remove the six screws onto the fuel pump.
Disconnect the connector and fuel band
from the fuel pump.
Remove the fuel pump and O-ring
Apply the sealant onto the O ring when
installation.
Fuel Pump Connector
INSTALLATION
Place a new O-ring onto the fuel tank.
Be careful not damage the fuel pump wire
and ensure the connector rearward.
Tighten the six screws.
O-ring
INSPECT BY MULTI-METER
Turn the ignition switch to OFF position.
Disconnect the fuel pump/fuel unit
connector.
Turn the ignition switch to ON position.
Connect the multi-meter (+) probe to the
Red/Black terminal and the multi-meter (-)
probe to the Green terminal with a multi-
meter.
Standard: 8 ~ 16 V Connector
INSPECTION
To measure the resistance if connection for
two pins of fuel pump.
If no connection or resistance is too big,
please replace a new one.
Standard: 1.9
5-28